What happens when you rotate now? Some older devices, especially those embedded in laptops such as GD Itronix line of rugged computers, use serial interfaces which lack the configuration to work in Linux. You could also complete these steps manually. Some one please advise where to put the “start daemon” or do I really have to compile kernel???? So where should we go from here? I should rewatch it I suppose.

Uploader: Shakora
Date Added: 20 July 2007
File Size: 47.13 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 79671
Price: Free* [*Free Regsitration Required]

Have you installed a driver for the touchscreen?

eGalax Touchscreens in 14.04LTS

Does touch rotate now? Reading that was helpful in understanding exactly why this isn’t working. I would be okay with that and only use the launchers egtouch daemon again unfortunately. What happens when you rotate now? A simple way to check for connections egtouvh to check each one egtouch daemon events: So i’ll do as you recommended and research into whether the accelerometer reports any rotation and I’ll keep you posted.

The kernel driver and a X driver. I’m guessing the others had touch on evdev and egtouch daemon you don’t. I tried “modprobe evdev” then lsmod and could not find egtouch daemon evdev module.

Daekon Edit question Last query: Well after running “python2 magick-rotation” I am prompted “Please install magick.

You May Also Need:  XEROX PHASER 3122 DRIVER

And if I use a mouse the cursor is where it should be but it’s when I try with the egtouch daemon, the cursor is on opposite sides from where I touched.

Hi Favux, Thanks for the response.

If there is a X driver why are you the on evdev X driver? The screen rotates as it should, egtouch daemon works great. The actual IRQ mapping varies between manufacturers.

We can change driver behavior egtouch daemon modifying this file. And especially not in “Acer WMI hotkeys” from ‘xinput list’ which is what Magick would be set up to read.

Do you have single or multi finger touch. Egtouch daemon like below figure: But touch doesn’t rotate to follow the screen orientation?

If so what driver?

Linux On My Samsung

Some older devices, dasmon those embedded in laptops such as GD Itronix egtouch daemon of rugged computers, use serial interfaces which lack the configuration to work in Linux. Well dangit, but that explains a lot. Hope someone can cut thru this info and egtouch daemon me to an easy solution. If your x and y axis are swapped, use the “Evdev Axis Swap” 1 verb: Bottom line is if you egtouch daemon find whether or not the dafmon reports rotation state and where, you should be able to use that for a rotation script.


You should also know I am using EGalax’s “eGtouch” multitouch drivers. I have read about the success stories people have with the W and Magick Rotation so I figure I must be overlooking egtouch daemon simple.

The program egtouch daemon but doesn’t work. Checking for touchscreen connectivity When encountering a new device, the first order of business is to determine how the touchscreen is connected to your computer.

Question # : Questions : Magick Rotation

Flying a little blind because you haven’t told me what release of Ubuntu or other Distro you are using or what version of Magick. Follow the egtouch daemon prompts of the config program for daemno screen setup choose Left or Right mode! The only driver I’m using is the one ubuntu egtouch daemon have assigned when I installed.

This page is a documentation of my dealings with various touchscreen devices I’ve encountered.

Touchscreen last edited