Call for service call Windows 95 will prompt you to load the diskettes to install the printer, follow the instructions to complete the printer installation. And it’s very sensitive to noise and static electricity. The SuperScript , Plus, , Plus cannot test for added memory. SuperScript printer does not print from Microsoft Word Windows 3. For example, if your system has 4 megabytes of RAM, then you must allocate at least 8. Image splits and wraps around page.

Uploader: Daijin
Date Added: 17 December 2013
File Size: 54.24 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 10843
Price: Free* [*Free Regsitration Required]

We suggest the following: And it’s very sensitive to noise and static electricity.

If Windows does nec superscript 860 let you allocate the required amount of space, check to make sure you have enough room on your hard disk drive. Will the SuperScript superxcript work with an computer.

Printing blank pages from WordPerfect 5. Shut off the printer, reseat the cable several times at the printer jecretry printing, if same problem replace printer cable with IEEE 6′ printer cable. Contact WordPerfect tech support for further assistance. The specifications are as follows: SuperScript i comes with K and can add up to an additional 48 MB of ram. Print image always shifted to the right. To print nec superscript 860 now rem out in Config.

You May Also Need:  ATHEROS AR5416 DRIVER

If software is version 1 you can obtain version 2. Can refurbish or other printer manufacture EP cartridges be used in the SuperScript printer.

NEC Superscript Toner Cartridges & Supplies

Green supersrcipt just blinks, SuperScript printer never prints. See Chapter 10 “Paper Jam”. Steady nec superscript 860 light after replacing EP cartridge, old cartridge works fine. Click on Port Settings.

The nec superscript 860 drivers are needed: Installed SuperScript software and now Superscrupt will sueprscript restart. Install a new toner cartridge. Will the SuperScript printers support Epson control codes?

Open control panel Open printers uncheck use Windows print manager click on connect uncheck fast print direct to port nec superscript 860 ok click on setup and check Use NEC’s print manager In order to make the settings effective, restart Windows by clicking the Restart button.

Cannot print from WP5. Under print to the following port select lpt1 and click on Apply. What emulation does the SuperScript use? Restart Windows, check Win and System.


Printer: NEC SuperScript | OpenPrinting – The Linux Foundation

Reinsert nec superscript 860 cartridge and print several pages. You can change this through the Control Panel, following the steps described below. This driver has to be upgraded. Technical Tips and Answers.


Increase the size to at least xxxx KB. Repair the nef give TA and transfer to service. Getting paper empty message all the time from SuperScript print manager. Check for paper in hopper, shut printer down and retry. Clean the laser beam window Refer to Chapter 9 “Cleaning the printer Mechanism”. Restart Windows and retry this worked.